Picture shows 1.75m machine
Swing over bed | 560mm |
---|---|
Swing in gap | 780mm |
Gap in front of face plate | 224mm |
Swing over cross slide | 350mm |
Distance between centres | 1750mm |
Spindle bore | 104mm |
Spindle nose | D1-11 |
Spindle taper | MT5 in bush |
Cross slide travel | 280mm |
Bed Width | 370mm |
Standard Equipment
- 3 jaw 300mm diameter steel chuck
- Dickson quick change toolpost and six holders
- Air assist “floating” tailstock
ProtoTRAK®SLX Control
- Tapers
- Chamfers
- Radii
- Arcs
- Straight & taper threads
- Multi start threads
